Bog is a filler with a similar consistency to toothpaste.
Manufactured from polyester/acrylic resin containing fine powders and pigments. Bog is made specifically for the restoration of ceramics, stone, marble and any other hard surface. Bog is hardened by the addition of a paste catalyst (supplied) which is added to the filler at a ratio of 100:2 just before use. |  |
Makes a superb and very quick filler for hard surfaces. Easily spread in thin or thick layers, to fill tiny chips to large missing areas. Once cured (approximately 15 minutes)it can be sanded to a perfect feather edge. If needed the filler can then be painted, any type of paint can be used.
Many ceramic and stone restorers use bog as a skim over other fillers or just for filling those annoying pin holes or less than perfect Milliput type fills.
Can be mixed with powdered pigments or dyes to make coloured fills. Bog white contains a high concentration of white pigment therefore is only suitable for colour matching paler/pastel shades. For colour matching darker shades Bog Natural should be used. |
